Lazy Jacks lines capture the. Lots of sailboat classes have descriptions on the Class forums about how to install Lazy Jacks or Dutchman systems. LAZY JACK KIT 253 Installation Manual. We recommend shock cord to hold Lazy Jacks open to make it easier to raise sail. Attach shock cord to the end of the.
Lazy-jacks: Mainsail tamers By Guy Stevens Article taken from Good Old Boat magazine: Volume 4, Number 4, July/August 2001. Take the pain out of the main, make your own lazy-jacks The easiest way for the shorthanded sailor to control the mainsail when reefing or stowing is a set of well-fitted lazy-jacks.
Lazy-jacks are made from a set of fixed or movable lines led from the upper section of the mast to the boom, with lines on each side. They guide the sail onto the top of the boom when reefing or dousing it and keep it there to be tied up at the crew's leisure. When properly installed, a lazy-jack system adds to safety and sail control.
Army Rage Game there. Lazy-jacks function well with sails with no battens, half battens, or full battens. When installed and used correctly, they prevent chafe and tearing. A well-thought-out installation makes the lazy-jacks convenient to use, puts them out of the way when stowed, and does not require expensive alterations of sails or sail covers. There are several varieties of lazy-jacks.
The fixed systems permanently attach to the mast and are not stowed. These require altering the sail cover, may chafe the sail while sailing, and sail battens may catch in the lazy-jacks, making hoisting difficult.
The better systems allow the lazy-jacks to be stowed and are deployed only when the sail is being doused or reefed. Off-the-shelf and custom-built lazy-jack systems are available. Sail-loft versions start at $200; mid-range systems cost about $400; and high-end systems can cost $1,500 or so if professionally installed. A scratch-built system can be fabricated for less than the cheapest off-the-shelf systems, and has some advantages in the way it fits and functions with your boat.
Not always better The off-the-shelf systems are not necessarily better designs. Most off-the-shelf systems use blocks at their segment junction points. When stowed, these blocks may bang on the mast. Correcting this situation requires the installation of hooks on the mast or boom and sections of shock cord to pull the support segment away from the mast. The need for blocks at the segment junctions is questionable, and they are more costly than thimbles. Systems that use a line through the sail can cause sail chafe and require modifications to the sail and cover. Since the average do-it-yourself sailor can't perform these modifications, the work can be expensive.
These lines can also interfere with the shape of the sail when set. Changing the sail requires re-threading the lines through the sail each time it is changed or removed, neither a quick nor an easy task. Some systems use shock cords to support the leg segments of the lazy-jacks. However, the shock cord provides too much stretch, and the sail may fall out of the lazy-jacks.
Most of these systems use a plastic clip-on fitting to secure the lazy-jacks to the boom and mast. This plastic deteriorates in sunlight and often fails within a season or two.
Crack Speedbit Video Accelerator 3.3 there. With about an hour more than you would invest in the installation of an off-the-shelf lazy-jack system, you can make your own custom set, tailored to your boat. By buying the individual components, you can create a custom system for less than $175 (see parts list). Four choices he line you select should match your splicing abilities and rig construction. There are four types to choose from: three-strand nylon; three-strand Dacron, standard double yacht braid, and more exotic fibers, such as Sta-Set X or Spectra line. Lazy-jacks made of three-strand nylon for the average boat can be assembled for about $91. The same lazy-jacks in Sta-Set would cost about $160. Driver Genius Vivid Color 4xe Windows 7.